The LGG-1 is a battery monitoring device that indicates the present charge level in a battery pack.
It displays the battery pack's charge condition using 3 LEDs that flash four easy to see and understand
messages: Good, Low, Caution, Damage.  It does this by continuously sampling the battery voltage and
averaging the data so that the true condition of the pack is displayed.   USERS MANUAL

Great for both helicopters and airplanes !

• Works for both 2S and 3S Li-poly batteries  (directly)
• Works for both 4S, 5S and 6S Li-poly batteries with adapter (on balance plug)
• Auto-detects pack type on power-up
• Highly visible with super bright LEDs
• Easy to use
• Weighs less than 3 grams
• Provides peace of mind and assurance
• Uses DSP technology

Spare battery cable for the LGG-1.

This Adapter  allows the LGG-1 to work with larger TP battery packs (4S, 5S and 6S).
It connects the LGG-1 battery cable to the 3S position on one of the larger packs.
Works great.

70A continuous, 100A max, • 3.3 - 50 VDC • Displays amps, volts, watts, & mAh.
Dimensions: 4.0 x 2.2 x 0.9 in, Weight: 3.6oz.

This product comes with a 90 day warrantee from MPI.
 

Great battery at a reasonable price for beginners, sport flying and mild 3D.  Great for use with the
Align 430X motor.  For TRex 450.

The TENERGY 2150 MAH battery is 11.1 volts of the type 3s1p.  It has a maximum discharge rate of 15C
(about 33 amps). The dimensions are 35mm x 102mm x 21mm.  It weighs about 158 grams and has
a built in balancing connector (JST style).  Li-Poly Safety Pamphlet

 

This battery is designed for use in the TRex 450.

The KP 2200 MAH battery is 11.1 volts of the type 3s1p.  It has a maximum discharge rate of 25C
(about 55 amps). The dimensions are 35mm x 110mm x 28mm.  It weighs about 195 grams and has
a built in balancing connector (TP style).  Li-Poly Safety Pamphlet

Great high power battery that won't puff !.
 

This battery is designed for use in the TRex 450.

2 KP 25C 22000 MAH batteries deal.  Buy 2 and save! 

Battery is 11.1 volts of the type 3s1p.  It has a maximum discharge rate of 25C
(about 55 amps). The dimensions are 35mm x 110mm x 28mm.  It weighs about 195 grams and has
a built in balancing connector (TP style).  Li-Poly Safety Pamphlet

Great high power battery that won't puff !.
 

This battery is designed for use in the TRex 600.

The TP-5000-6SX  battery is 22.2 volts of the type 6s1p.  It has a maximum continuous discharge
rate of 25C (125 amps) with a 50C (250 amps) burst. The dimensions are 50mm x45mm x160mm.  
It weighs about 726 grams and has built in balancing connectors  (4 pin & 6 pin Tp style). 
Li-Poly Safety Pamphlet    Balancing Connector Diagram

Excess shipping charges will be refunded when shipped.

Email us since a discount may be available for this item.

This battery is designed for use in the TRex 450.

The Thunder Power "Extreme" 2200 MAH battery is 11.1 volts of the type 3s1p.  It has a maximum discharge
rate of 25C (55A ) with a 50C (110A) burst rating.  The dimensions are 35mm x 106mm x 23mm.
It weighs about 171 grams and has a built in balancing connector.  (#TP2200-3S)

These are the ultimate 3D performance batteries.  Li-Poly Safety Pamphlet   Balancing Connector Diagram

Email us since a discount may be available for this item.                

This battery is designed for use in the TRex 450.

2 TP "Extreme V2" 2200 MAH batteries (#TP2200-3S) deal.  Buy 2 and save!

Battery is 11.1 volts of the type 3s1p.  It has a maximum discharge rate of 25C (55A ) with a 50C (110A) burst
rating.  The dimensions are 35mm x 106mm x 23mm.
It weighs about 171 grams and has a built in balancing connector
.
These are the ultimate 3D performance batteries.  Li-Poly Safety Pamphlet   Balancing Connector Diagram

Email us since a discount may be available for this item.            

This battery is designed for use in the TRex 450.

The Thunder Power "Extreme" 2200 MAH battery is 14.8 volts of the type 4s1p.  It has a maximum discharge
rate of 25C (55A ) with a 50C (110A) burst rating.  The dimensions are 32mm x 106mm x 32mm.
It weighs about 218 grams and has a built in balancing connector.  (#TP2200-4S)

These are the ultimate 3D performance batteries.  Li-Poly Safety Pamphlet   Balancing Connector Diagram

Email us since a discount may be available for this item.                

This battery is designed for use in the TRex 450.

2 TP "Extreme" 2200 MAH batteries (#TP2200-4S) deal.  Buy 2 and save!

Battery is 14.8 volts of the type 4s1p.  It has a maximum discharge rate of 25C (55A ) with a 50C (110A) burst
rating.  The dimensions are 32mm x 106mm x 32mm.
It weighs about 218 grams and has a built in balancing connector
.
These are the ultimate 3D performance batteries.  Li-Poly Safety Pamphlet   Balancing Connector Diagram

Email us since a discount may be available for this item.            

This battery is designed for use in the TRex 450.

The Thunder Power "ProLite" 2100 MAH battery is 11.1 volts of the type 3s1p.  It has a maximum discharge
rate of 15C (about 31.5 amps) with a 50A burst rating.  The dimensions are 34mm x 100mm x 20mm. It weighs about 142 grams and has a built in balancing connector.

These are great 3D performance batteries.  Li-Poly Safety Pamphlet   Balancing Connector Diagram

Email us since a discount may be available for this item.                

This battery is designed for use in the TRex 450.

2 TP "ProLite" 2100 MAH batteries (#TP2100-3S) deal.  Buy 2 and save!

Battery is 11.1 volts of the type 3s1p.  It has a maximum discharge rate of 15C (about 31.5 amps)
with a 50A burst rating.  The dimensions are 34mm x 100mm x 20mm.
It weighs about 142 grams and has a built in balancing connector.

These are great 3D performance batteries.  Li-Poly Safety Pamphlet   Balancing Connector Diagram

Email us since a discount may be available for this item.

TP-205 advanced balancing technology provides active balancing and safer charging for Li-Poly batteries. It's designed to be used with 2 to 5 cell Li-Po packs.     Balancing Connector Diagram

Features:

• Auto Cell detect for any 2 to 5 cell packs
• Check and display battery conditions
• Imbalance voltage warning
• Over voltage warning
• LEDs display each cell in bleeding/balancing
• Alerts full charge status
• Built-in data port for interfacing with TP chargers.

Specifications:

• 0.1% reference voltage controlled by microprocessor chip
• Balance cells: 2 to 5 cell packs in series
• Balance start voltage: 4.1V, or 3.2V for > 0.0V imbalance
• Bleeding current: 420 mA Max
• Imbalance control voltage: +/- 0.005V
• Under voltage warning: 3.2V +/- 0.001V
• Over voltage warning: 4.3V
• Full charge indicator: One or more cell 4.2V and all others within 0.01V
• Size: 1.5x3.52x0.54 in (38x90x14 mm)
• Auto cell balance: +/- 0.005V (cell voltage > 4.1V/cell)
• Auto cell balance: +/- 0.015V (cell voltage < 4.1V/cell)
   

Email us since a discount may be available for this item.

TP-210V advanced balancing technology provides active balancing and safer charging for Li-Poly batteries. It's designed to be used with 2 to 10 cell Li-Po packs.     Balancing Connector Diagram

Features:

• Auto Cell detect for any 2 to 10 cell packs
• Check and display battery conditions
• Imbalance voltage warning
• Over voltage warning
• LEDs display each cell in bleeding/balancing
• Alerts full charge status
• Built-in data port for interfacing with TP chargers.

Specifications:

• 0.1% reference voltage controlled by microprocessor chip
• Balance cells: 2 to 10 cell packs in series
• Balance start voltage: 4.1V, or 3.2V for > 0.0V imbalance
• Bleeding current: 420 mA Max
• Imbalance control voltage: +/- 0.005V
• Under voltage warning: 3.2V +/- 0.001V
• Over voltage warning: 4.3V
• Full charge indicator: One or more cell 4.2V and all others within 0.01V
• Auto cell balance: +/- 0.005V (cell voltage > 4.1V/cell)
• Auto cell balance: +/- 0.015V (cell voltage < 4.1V/cell)
   

Email us since a discount may be available for this item.

This battery charger is designed for use in your home or workshop since it is line powered from 120/240 volts AC.
Batteries can be 2 to 4 cells (7.4V, 11.1V, 14.8V).  It uses the balance charging method where each cell is charged individually which provides maximum performance and life of the battery.

This battery charger is DC powered and requires a power supply.

Features:

• Handles LiPo batteries with up to 5-cells in series.
• Maximum charge current is increased to 7 amps.
• The custom 32 character LCD now includes a blue back-light for easy viewing anytime.
• A new control dial, updated programming changes, and improved instructions for easier programming.
• Banana plugs on the input lead, and includes mating alligator clips for easy connection to input power sources.
   
• Precision peak detection with adjustable sensitivity for NiCd and NiMH batteries.
• "Constant current / constant voltage" charge method for LiPo/Ion and Pb batteries.
• Temperature monitoring option (GPMM3151 Thermal Probe required).
• Top-off charge feature fully charges NiMHs without overheating.
• 0-250mA adjustable trickle charge current (NiCd and NiMH only)
• 0.1-3.0A adjustable discharge current.
• Adjustable discharge cutoff voltages for NiCd/MH, pre-set voltages for Pb and LiPo/Ion.
• Perform 1 to 10 cycles (NiCd/MH only).
• Recall data for 10 full cycles.
• Configure up to 10 batteries in memory for instant, easy recall and charger setup
• Displays input and output volts, peak volts, average discharge volts, charge and discharge capacity,
  currents and time, and error messages.
• Audible sound cues aid in programming and notification of function changes.
• Safety features include cool-off time delay, maximum NiMH charge input, fast charge safety timer,
  current overload and reverse polarity protection.
• Built-in cooling fan, for better charge efficiency and extends life of charger.
• Small and lightweight, with a super-sturdy aluminum case for rugged durability.

Sale

Home Made Power Supply

This charger has both AC and DC inputs.  Use at home or at the field.
The new Vision Peak Ultra from Dynamite features adjustable charge rates and works equally well with
Ni-Cd, Ni-MH, and Li-Po packs. With a multi-function LCD and an LED charge indicator to monitor your
battery, it's a simple and safe way to recharge your cells.  It also offers an automatic trickle charge,
ventilated case, and 5-year warranty.

Features

• Charges virtually all 1- to 8-cell Ni-Cd and Ni-MH battery packs and 1- to 3-cell Li-Po battery packs
• Adjustable charge rates from 0.1A to 5A for Ni-Cd and Ni-MH battery packs
• Adjustable charge rates from 0.1A to 2.5A for Li-Po battery packs
• Multi-function LCD shows charge time, current and voltage
• Input and output circuit protection
• Automatic trickle charge
• Limited 5-year warranty

This is a top of the line charger loaded with all the features you will ever need.

 Features

• Hi-Efficiency digital power system
• Specially designed for safe Li-Poly charge algorithm
• Backlit LCD
• Balance charge with built in balancer
• Individual cell overcharge protect capability
• 25 memories for each battery type
• Programmable to various charge settings
• Discharge cut-off voltage is selectable
• Fast balance charging

Home Made Power Supply

Email us since a discount may be available for this item.            

This is a top of the line charger loaded with all the features you will ever need.

 Features

• Hi-Efficiency digital power system
• Specially designed for safe Li-Poly charge algorithm
• Backlit LCD
• Balance charge capability (TP balancer required)
• Individual cell overcharge protect capability
• Provide data -port for communication between balancer and charger
• Automatic fan control
• Programmable 10 memory charger parameter settings
• Programmable to various charge settings
• Discharge cut-off voltage is selectable
• Fast charge algorithm capability

General Specifications:

• Input Power Capacity: 11V-15V DC 25 Amps at Maximum charge Rating
• Charge Battery Type: Li-Poly or Li-Ion
• Charge Voltage: Up to 10 cells / 42V
• Charge current: 0.25A to 10 Amps
• Charge type: CC and CV
• Charge Termination: 5 types selectable
• Over charge cutoff voltage: 4.235V
• Auto-balance charge current: 300 mA
• Imbalance Cutoff: .02V
• Auto-imbalance-current control active voltage: 0.12V
• Auto-current control reset imbalance voltage:0.01V
• Discharge voltage; 10 Cell / 42V
• Discharge power capability; up to 28 Watt
• Capacity display: 0----99999mAh
• Timer display: 0----10 hours
• Display tolerance: +/- 0.25%

Home Made Power Supply

Email us since a discount may be available for this item.            

This Programmer that allows you to update the software from your computer to your TP1010C charger.
USB cable included.

This Thermal Probe is specifically designed to function with the Triton Charger.  It prevents overheating
of the battery pack when charging/discharging.

 

These plugs are typically used for connecting charging cables to a charger or a charger to a power supply.

 

This is a low-resistance, compact-size connector for high current applications.
The design eliminates the possibility of reverse polarity connections.
Soldering is required.

 

This is a low-resistance, compact-size connector for high current applications.
The design eliminates the possibility of reverse polarity connections.
Soldering is required.

 

These mini-size connectors are for low to medium current (10 amps or less) applications.
The design eliminates the possibility of reverse polarity connections.
Soldering is required.

 

This wire is perfect for battery packs, motors, ESC's etc.  The insulation is made of silicone rubber which
can withstand the high temperatures of soldering and won't melt.  3 feet each of both red and black. 

 

This wire is perfect for battery packs, motors, ESC's etc.  The insulation is made of silicone rubber which
can withstand the high temperatures of soldering and won't melt.  3 feet each of both red and black. 

 

This wire is perfect for battery packs, motors, ESC's etc.  The insulation is made of silicone rubber which
can withstand the high temperatures of soldering and won't melt.  3 feet each of both red and black. 

 

This wire is perfect for battery packs, motors, ESC's etc.  The insulation is made of silicone rubber which
can withstand the high temperatures of soldering and won't melt.  3 feet each of both red and black. 

 

This wire is perfect for charging cables etc.  Wires are color coded and molded together to stay neat
and tangle free.  Package contains one 6 foot length. 

 

This heat shrink is for general use.  It has a 3 to 1 shrink ratio.  Comes in four colors, clear, red, blue and black.
Package contains four 5 inch lengths. 

 

This heat shrink is for general use.  It has a 3 to 1 shrink ratio.  Comes in four colors, clear, red, blue and black.
Package contains four 5 inch lengths. 

 

This adapter connects to an Align or DN  3S pack and allows it plug into a TP style header.

                 

This adapter connects to a TP 3S pack and allows it plug into a JST style header.
This adapter will allow you connect your TP packs to an Align charger.

                 

This adapter/extension set (3 wire) plugs into the Align RCC-4CX charger. 
It comes with 1 dual female header, 1 dual 8 inch male receptacle and 1 single 4 inch male receptacle. 
This set will allow you to extend your balance charging cable and adapt to other connector types (not included).   This set will also work for the Lama2 battery and charger.
                 

This adapter/extension set (4 wire) plugs into the Align RCC-4CX charger. 
It comes with 1 dual female header, 1 dual 8 inch male receptacle and 1 single 4 inch male receptacle. 
This set will allow you to extend your balance charging cable and adapt to other connector types (not included).   This set will work for Align and Apex V2 3S packs.
                 

This adapter/extension set (5 wire) plugs into the Align RCC-4CX charger. 
It comes with 1 dual female header, 1 dual 8 inch male receptacle and 1 single 4 inch male receptacle. 
This set will allow you to extend your balance charging cable and adapt to other connector types (not included).  
                 

This 4 pin tap has 8 inch wires attached.  It is useful for making an adapter or changing the balance
connector on your battery.     Balancing Connector Diagram
                 

TP 6 pin Tap  

This 6 pin tap has 8 inch wires attached.  It is useful for making an adapter or changing the balance
connector on your battery.     Balancing Connector Diagram

This 4 pin extension is about 11.5 inches long.  It is useful for making an adapter or changing the balance
connector on your battery.     Balancing Connector Diagram
                 

TP 6 pin Extension  

This 6 pin extension is about 11.5 inches long.  It is useful for making an adapter or changing the balance
connector on your battery.     Balancing Connector Diagram