Highly efficient motor with a max power output of 500 watts.  The maximum continuous current is 36 amps.

A 11 or 12 tooth pinion should be used on the Twinn Rexx with this motor.

This BEC is rated for 3.5 amps continuous.  It has plenty of power for just about any model.

The TH-2 Micro is specifically designed for micro sized models.  Supports 2 and 3 point CCPM mixing.  Compact and lightweight (13 grams). Directly drives up to 6 micro servos (HS-50,  HS-65).
Unit consists of an FCPU-1 computer board and a TH-2 micro application board.

Review by RC-Heli magazine TH-2 RC-Heli Review  

For all types of Helicopters and VTOLS:

•  CCPM mixer with gyros for single rotor (multi-blade) helicopter.
   
• Tandem mixer for CH47, CH46 etc.
   
• New VTOL software highly flexible for V22, KMAX , Harrier, etc type aircraft.
  
  Uses our Tech Link USB PC software for programming and setup.

No further discounts apply.

The TH-2 GP (General Purpose) is designed for all single rotor multi blade, tandem rotor and VTOL aircraft. 
Supports 2, 3 and 4 point CCPM mixing.  Has 4 GP I/O lines for future use and secondary power inputs
to directly drive up to 8 mini servos. Use the extender boards for large/digital servos. 
Unit weighs about 14 grams.  Unit consists of an FCPU-1 computer board and a TH-2 GP application board.

Review by RC-Heli magazine TH-2 RC-Heli Review  

Uses our Tech Link USB PC software for programming and setup.

For all types of Helicopters and VTOLS:

•  CCPM mixer with gyros for single rotor (multi-blade) helicopter.
   
• Tandem mixer for CH47, CH46 etc.
   
• New VTOL software highly flexible for V22, KMAX , Harrier, etc type aircraft.
  
  Uses our Tech Link USB PC software for programming and setup.

No further discounts apply.

These extender boards allow you to separate the servo power and signal wires for large/digital servos and
for long wire lengths.  The power wires run directly from the extender boards to the battery which supports
the use of larger capacity wire.  The header pins are gold plated and have a 0.1 inch spacing for plug and
play connectivity.

This lightweight mounting plate makes it easy to mount the TH-2 to your model frame with screws.
The TH-2  attaches to the plate with Velcro or double sided tape. 
Mounting screws and stand-offs included.

Mini-B USB cable (5 pin), 6' long, used for connecting our USB devices to your PC.
 

The Twinn Rexx tandem is based on the well proven and popular T-Rex rotor heads and drive components.
This base kit includes the frame and all mechanics. 
Note (Rotor heads (2), electronics, and electrics) are not included in this kit.

See the product details for more info -->

 Recommended Parts

Twinn Rexx RC-Heli Review

Video  This video features pilot Jorg Nickel and his Twinn Rexx

        OUT of stock for now - I don't have time to make kits - too busy working full time......Joe

Note: Excess shipping will be refunded.  No further discounts apply.

CH47 Chinook sport scale body for the Twinn Rexx tandem.

Kit includes: L/R body panels, frame mounts and all hardware, plywood/foam frame supports and two
hex keys.

See the product details for more info -->

Note: Excess shipping will be refunded.  No further discounts apply.

CH47 Chinook sport scale engines kit for the Twinn Rexx tandem.

Kit includes: Formed plastic parts for two engines, instructions and assembly diagram.
 

         Now in Stock !