JustGoFly - Highly efficient motor with a max power output of 500 watts. 
The maximum continuous current is 36 amps.  Weight 62 grams.

Latest brushless motor from Align with loads of power.
Output of 400 watts.  The maximum continuous current is 39 amps.  The motor weighs about 76 grams.
 

Latest brushless motor from Align with loads of power.
Output of 350 watts.  The maximum continuous current is 35 amps.  The motor weighs about 70 grams.
 

Note:  This motor requires a 20C+ battery and a very high head speed (2800+) to perform. 
          Proper setup is critical for performance.  Use of a power meter is recommended.
 

Latest brushless motor from Align that replaces the 430L.  91% efficient with a max power
output of 300 watts.  The maximum continuous current is 28 amps.  The motor weighs about 60 grams.

The 11 tooth pinion should be used with this motor.

This ESC is rated for 35 amps continuous.  It has over 200 steps of resolution for very smooth throttle
performance.  The BEC is rated for 5 volts at 2A max current.

Note: The BEC must be disconnected (red power lead to Rx) for use above a 3S battery.  An external
switching type BEC is required for this purpose.
 

This ESC is rated for 35 amps continuous.  It has over 200 steps of resolution for very smooth throttle
performance.  The BEC is rated for 6 volts at 2A max current.

Note: The BEC must be disconnected (red power lead to Rx) for use above a 3S battery.  An external
switching type BEC is required for this purpose.
 

Note: The BEC must be disconnected (red power lead to Rx) for use above a 3S battery.  An external
switching type BEC is required for this purpose.

SALE
 

These bullet type connectors are used for connecting a motor to the ESC.

These bullet type connectors are used for connecting a motor to the ESC.

This BEC is rated for 3.5 amps continuous.  It has plenty of power for just about any model.

This BEC is rated for up to 7 amps continuous.  It has plenty of power for just about any model.

Note:  Not recommended for the Twinn Rexx.

Use this Ferrite ring to eliminate glitches caused by your ESC.  Just wrap your "ESC to Rx" lead 5 to 6 times
around the ring.  Installs in minutes.  Connector disassembly is not needed.  Weighs only 3.5 grams.
 

This heat sink is made of anodized extruded aluminum.  It has a large surface area due to the fins which transfer
heat away from the motor to help keep it running cool.

Great working low cost blade balancer.

Used for installing or removing the one-way bearing from the main drive gear.

Great working, well made,  low cost pitch gauge. Range is +/- 12 degrees.
This is a must have item to setup your heli properly.

Great working, well made. Range is +/- 15 degrees.  Fits blades from 300 to 600.

Helps to keep your wires and cables neat and organized.  Sleeve is 1/4" and expands up to 1/2". 
Allows connectors to slide through and holds wires together tightly.  Comes with 36" of  black sleeve
and 12" of 1/2" black heat shrink.

Helps to keep your parts and tools together and from getting lost while working on your T Rex.

All the most popular items.  Includes the Align repair towel, 1.5mm, 2.0mm and 2.5mm
ball screwdrivers with the patented ProHold® ball-ends.

Training gear specifically designed for the T-Rex family of mini helicopters.  Helps prevent costly tip-overs.
Comes complete.  Assembles in minutes.  Instructions included.   INSTRUCTIONS

Carry your T Rex with protection and style.  This case comes with a pre-cut foam insert designed to carry a
T Rex heli, transmitter, battery packs, tools, charger and more.  Comes with shoulder carrying strap.
Weighs 3.4Kg. Size is 698x203x284(mm).

NOTE: These cases are made in China and do not have the same quality as a case made here in the USA
costing $250 or more.  You should expect any of the following: minor dents and imperfections in the trim pieces.  Overall,  these cases are pretty nice and do a great job protecting your Heli and radio gear.

Note: This item ships separately and has extra shipping & Insurance charges applied.  This item is exempt from all free shipping offers.
          Excess shipping charges  will be refunded to your account promptly when your order is shipped.   Ships UPS ground.
 

This Navy blue cap sports the Align logo and keeps the sun out of your eyes when flying.

This Navy blue Neck Strap sports the Align logo and keeps your transmitter hanging comfortably
around your neck.